Run the DRemover98_2K.exe program from the software CD-ROM, then reboot the PC. Unplug the USB-Serial cable from your PC. If you want to remove the USB-Serial cable driver program, you can uninstall it by following the steps below: In General tab, please change the Port value to USB to Serial Port (COM3).Īfter finishing these processes, you can use USB to Serial Bridge Cable to connect RS232 Serial 56K FAX Modem and execute the Dial-up fuction to connect Internet, and send the FAX with the FAX software(ie: Microsoft FAX) properly. Open Modems Properties, select the Modem, click Properties. If you have already installed a Modem device before, click Start, Settings, Modems. Turn on your computer and plug in the USB connector of the USB-Serial cable into the USB port. Plug the DB 9 connector of the USB-Serial cable into your Modem. Under this situation, please kindly unload the equipment and install again.įollow the steps below to connect your RS232 Serial Device (ie: Modem) to the USB port of your PC: Device Manager Devices by connection ports (COM LPT) Prolific USB-to- serial Comm port(COM3) Port Settings If the Modem could not link with the new. When Changing the port, the peripheral equipment could not shift to the new port, and run smoothly. If the Modem could not link with the new port, and run smoothly when changed the port, please kindly unload Modem, and re-install it. Please kindly choose the needed com, and click on " ok”. (3) Please choose " Port Settings ", and then click on "Advanced". (2) Doubly click on “Prolific USB-to- serial Comm port(COM3)”.And it could go to ‘ properties'. (1) Please click on the Device Manager\ Devices by connection \ ports (COM
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |